蓋板鋼模具其施_上間早、里里程、事載好、抗沖擊、丁弓匆折、排水魚大。經過熱反詳處理后美從耐用,防腦,具有鑄鐵壺破個口似的優點。采用鉸鏈聯結或者采用鉤聯接等方式,便于開啟,并具防盜功能。精密蓋板鋼模具要用剛度大的模架,增加模板的厚度,增加支承柱或錐形定位元件以防止模具受壓力后發作變形,有時內壓可以抵達100MPa.頂出設備是影響制品變形和標準精度的重要因素,因此大約選擇佳的頂出點,以使遍地脫模均勻。
Construction of cover plate steel mould_ Early in the morning, mile
mileage, good load, impact resistance, small bow and quick break, large
drainage fish. After heat treatment, meicong is durable, brain proof,
and has the advantages of breaking a cast iron pot. It adopts hinge
connection or hook connection, which is easy to open and has anti-theft
function. The precision cover plate steel mold should use the mold base
with high rigidity, increase the thickness of the template, increase the
supporting column or conical positioning element to prevent the mold
from deforming under pressure, sometimes the internal pressure can reach
100MPa. The ejection equipment is an important factor affecting the
product deformation and standard accuracy, so the best ejection point
should be selected to make the demoulding uniform everywhere.
蓋板鋼模具出產批量小,一般歸于單件的出產,但是蓋板鋼模具需要許多的標準件,大到模架,小到頂針,這些不能也不可以只由一一個廠家單檢查井鋼模具 隔離墩模具 隔離墩鋼模具 流水槽模具 U型槽模具 螺桿啟閉機 卷揚式啟閉機 銅雕佛像 獨結束,且制造技能凌亂,一般設備和數控設備運用極不均衡。精密模具要用剛度大的模架,增加模板的厚度,增加支承柱或錐形定位元件以防止蓋板鋼模具受壓力后發作變形
The production batch of cover plate steel mold is small, which is
generally attributed to the production of single piece. However, the
cover plate steel mold needs many standard parts, ranging from the mold
base to the thimble. These can not and can not be finished by one
manufacturer alone, and the manufacturing skills are disordered, and the
operation of general equipment and CNC equipment is extremely
unbalanced. In order to prevent the cover steel mould from deforming
under pressure, the rigid mould base should be used, the thickness of
the template should be increased, and the supporting column or conical
positioning element should be added